Fyrlyt Nemesis (pair)
FYRLYT are manufactured right here in South Australia and these High Performance Driving Lights offer 9000 lumens of light. With superior performance and being great value they are cheaper than LED, HID and other lights.
These lights are 24V but with the supplied step-up converter they will fit any 12V vehicle.
250w globe.
Integrated Spread or Spot beam, change in seconds using the 'Twist & Turn Bulb Holder'.
No Warm up time.
No ugly covers. Replacement lens is available if you happen to break yours.
The best just got better!.
Why use cheap chinese LED or HID lights when you can buy quality Australian made products at a reasonable price.
The wiring loom is not included in the price. We sell the Nemesis loom separately in our web store and in our shop. IT IS RECOMMENDED BY FYRLYT TO INSTALL THESE POWERFUL LIGHTS WITH THIS LOOM TO ACHIEVE OPTIMUM PERFORMANCE
Also available in 24V.
*FREE PICK UP IS AVAILABLE FROM OUR STORE AT 1 / 190 PARK TERRACE, SALISBURY PLAIN
- 2 x 250w FYRLYT Driving Lights
- Stainless Steel Bolts & Nylock Nuts
- Plug Lead
- 12V to 24V step-up converter
- Fitting Instructions
Quick Change Sacrificial Lens The lens has been designed to be replaced without tools, making lens covers redundant. With FYRLYT the lens and cover are one. This eliminates the compounding light loss induced by the 2 redundant plastic to air surface transitions that come with transparent lens covers. This with the reduction in operating temperature is valuable in optimising light performance. The lens removal also allows for the bulb to be changed from the front of the light if the mounting limits rear access.
Integrated Quick Change Bulb and Heat Sink Management of the operating temperature of high performance lights is crucial. FYRLYT has integrated a quick release system for fast bulb change with a high performance aluminium alloy heat sink, manufactured from Aluminium Alloy. This feature is an essential component in facilitating the use of high performance light sources whilst maintaining acceptable operating temperatures.
Integrated Spread or Spot Beam FYRLYT provide two factory set beam patterns in the one light that can be adjusted to suit the driving conditions in seconds by pushing and rotating bulb holder.
Gore®Vent Breather The Gore®Vent breather reduces the possibility of water ingress when operated in moist air whilst paradoxically providing a seal if the light is submerged. This is achieved by its breathing characteristics which provides a means to maintain a near to equilibrium air pressure to that of ambient by releasing pressure caused by the temperature rise when the light is in use. Conversely it allows an inflow of air when it cools to eliminate the creation of a significant vacuum within the light.
Filament Tuned Reflector The Filament Tuned Reflector (FTR) has been geometrically optimised to realise the full potential of the Luminous Flux produced by the light source, directing more light where it is needed. Manufactured from aluminium with a robust base and hard top coat, the FYRLYT reflector possesses exceptionally high spectral reflectance whilst being scratch, chemical and heat resistant.
Billet Machined Aluminium Alloy Base The billet machined Aluminium Alloy base maintains its impact strength at extremely low temperatures unlike some metals and plastics, whilst providing exceptional resistance to vibration. This ensures the light maintains the set position in the most adverse operating conditions. In addition it provides infinitely variable adjustment within a 25 mm range and is also reversible.
Hard Coated Optical Surfaces The Hard coating applied to both the lens and reflector optical surfaces provides improved chemical and scratch resistance to the base materials, maximising the longevity of the optical performance of the light. Premium driving lights are an investment you want to last!
Stainless Steel Fasteners The fasteners and spring in FYRLYT are manufactured from austenitic stainless steels for optimum corrosion resistance. FYRLYT considers every potential scenario and utilises the best grade of materials for durability.
Injection Moulded Engineering Resins The non metallic components of FYRLYT are manufactured from high impact reinforced and non reinforced engineering polymers with exceptionally high impact and fatigue characteristics. This coupled with higher than normal wall sections have created an extremely robust configuration. 400% thicker than a rivals 240 model!
FYRLYT Lights are Rebuildable All components can be individually purchased from us and thanks to the smart design it is simple to reassemble FYRLYT's to as good as new.